Scott's Addict 10 is a well-priced endurance bike with a high-performance ride. It has a firm feel to it, but the carbon layup helps keep the comfort levels up, and the SRAM Rival AXS groupset adds to the efficiency.
Ride
Scott describes the Addict as being designed from the ground up, with long days in the saddle at the forefront; it's Scott's endurance model, if you like.
> Buy now: Scott Addict 10 for £3,149 from Tredz
While the geometry of the front end is a bit more relaxed than you'd find on a peloton-ready race machine, the Addict is still very much a performance bike thanks to plenty of stiffness and a weight that gives it a positive feel both on the climbs and under acceleration.
In fact, the Addict has one of the firmest rides of an endurance bike that I know of, stopping just short of being harsh.
It's not uncomfortable by any stretch of the imagination, thanks in large part to the flex-providing slender seatstays, and the way that both the top tube and seat tube slim down in profile from where they meet the head tube and bottom bracket respectively.
The front end feels very tight. The amount of material in the head tube makes it stiff enough to cope with steering loads when hammering downhill, and the stiffness of the fork plays its part too, especially under heavy braking forces when scrubbing off high speeds.
>Insuring a new bike? Compare quotes from over 30 providers
The down tube's profile is huge, most noticeable at the bottom bracket shell, making full use of that width to repel the forces from hard pedalling efforts. The chunky chainstays help keep the rear wheel in check, too.
If you want speed and fun the Addict definitely delivers.
This medium model has a 72.5-degree head angle, a degree or so less than most race bikes, but the steering is fast enough for high-speed descents. It enables you to push hard through the corners with precision, but thanks to the front end not being twitchy, or the steering really quick, it boosts confidence even if you're not the most fearless descender.
The wheelbase, at just over a metre, gives the Addict a composed but still relatively nimble feeling, great for making good progress on unfamiliar roads or on far from perfect surfaces.
Overall, in terms of the ride, the Addict is probably as close to a race bike as many of us need.
Geometry
There are seven sizes available, which is a decent spread, ranging from XXS to XXL which covers top tube lengths of 515mm (effective) to 600mm.
The medium on test sits bang in the middle with a 555mm top tube, 145mm head tube and 525mm seat tube.
As I mentioned above, the head angle is 72.5 degrees while the seat angle is 74, which definitely helps put you in a forward position to get the power down.
That wheelbase length is 1,010.6mm, with 420mm chainstays, and stack and reach figures are 572.4mm and 390.9mm respectively.
Frame and fork
One of the most notable thing about the Addict is its clean lines, thanks to a complete lack of any external cables, hoses or wires.
The frame, fork and components have been designed to work as an integrated solution, between them running all of the hoses, wires and cables internally from the levers until they exit next to the components they are connected to. It looks cool, and you get a small amount of an aero boost no doubt.
The Addict Disc HMF frame and fork have been designed with every tube shape and wall thickness optimised for performance and comfort, according to Scott.
Scott says it uses: 'Evo-Lap technology which dictates where and how the carbon fibres are laid to get the best out of them, using countless calculations from FEA (finite element analysis) software to simulate forces on the frame and fork, alongside real world testing.'
Judging by the amount of stiffness and comfort, it's got the balance pretty much spot on.
The quality of the frame and fork is high, and I think the blue paint job makes the Scott look more expensive than it actually is, though you aren't getting all of the neat touches found on the higher spec Addict RC models, which use the lighter HMX frame and fork.
You don't get the D-shape full-carbon seatpost and slender seat clamp of the RC, for example, but a more traditional setup with a round post and standard clamp.
At the front the head tube is tapered from 1 1/4in to 1 1/2in, with a fork steerer to match.
While Scott has gone for a press-fit bottom bracket, which won't be to everybody's taste over a threaded option, I had no issues whatsoever. The wider bottom bracket shell, created by having the bearing cups inside, at least allows for the tube junctions to be bigger, and therefore stiffer.
The Addict has the usual two sets of bottle cage mounts on the seatpost and down tube, along with some that make it compatible with Scott's Syncros mudguard kit.
If you are adding stuff, the bike has a weight limit of 120kg overall; that includes the bike, rider, and any other equipment.
Groupset
The Addict 10 comes with SRAM's entry-level wireless electronic shifting Rival AXS groupset.
I've used it on quite a few bikes and I'm really impressed by it, as was Mat – as you can tell by his review here.
A quick breakdown: it's a completely wireless system that is very easy to set up and adjust should the need arise, as there is just a single button on each lever to change gear. You press the right shifter to drop the chain down the cassette, and push the left button to make it climb back up again.
To shift between the front chainrings you push both buttons and the chain will move to the other ring.
It's such a simple setup to use.
In terms of shifting speed and quality it's great, and even though it is all electronic there is good feedback from the button to let you know the chain has moved.
The chainset uses 46/33-tooth rings, paired to a 12-speed 10-36T cassette. It sounds low but I found it to be very efficient, barely needing to come out of the large chainring, and when using the 10-tooth sprocket there is plenty of high-end speed available without spinning out.
The SRAM Paceline disc brake rotors are 160mm in diameter front and rear, which gives loads of stopping power, and just like all of SRAM's hydraulic systems, there is loads of feel and modulation.
Finishing kit
Syncros is Scott's in-house component brand so it's no surprise to see it supplying all of the components.
The Creston 2.0 Compact handlebar is made from alloy and, the clue's in the name, has a compact drop, so your position in the lowest section of the handlebar doesn't need to be too extreme.
The Syncros RR2.0 stem is designed to accept the cables as they exit the central section of the handlebar and guide them down through the head tube to begin their journey through the frame and fork. It's a neat looking design with plenty of stiffness.
The alloy seatpost has a 27.2mm diameter and is pretty standard in design, with a cradle that is easy to adjust.
I got on well with the short Syncros Tofino 2.0 saddle; it's relatively firm but that's how I prefer it. I found the shape unobtrusive for all kinds of riding positions too.
Wheels and tyres
Syncros also supplies the wheels: a set of RP2.0 Discs with an alloy rim and 28 spokes front and rear.
They are shallow, so there is no aero advantage to be had, but they performed well enough in terms of weight for acceleration and climbing. Stiffness is pretty good, and I had no issues with durability.
For a road bike, the Addict has impressive tyre clearance, highlighted by the fact that it comes fitted with 32mm tyres as standard (though they're not tubeless ready).
They're Schwalbe Ones, quick tyres that roll well and definitely have plenty of grip in both the wet and dry.
Punctures weren't an issue either.
Value
This Addict 10 is priced at £3,145, which on the whole is competitive.
Cube's endurance model, the Agree C:62 Pro, offers a similar ride style and also comes with a Rival AXS groupset and alloy wheels. Read our review here. It's heavier than the Scott by a few hundred grams, and a bit more expensive too at £3,399.
> Best endurance road bikes – perfect for sportives, audax and mile-munching
Giant's Defy Advanced Pro 3 impressed me a lot when I reviewed it last year, apart from the wooden-feeling tyres. It weighs around the same as the Scott and comes with a set of deep-section carbon fibre wheels for its £2,999 price tag, down £200 on last year. You are only getting a Shimano 105 mechanical groupset, though, which is a big drop from the Rival AXS found on the Cube and Scott.
Conclusion
The Scott Addict 10 is ideal if you want a road bike that's stiff and fast but not super-fast, with the twitchy handling that often accompanies it. It rides very well, and Scott has managed to just keep it on the comfortable side of harsh.
Verdict
Smooth-handling endurance machine with a racy edge and plenty of stiffness
If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website
Make and model: Scott Addict 10
Size tested: Medium, 55.5cm
List the components used to build up the bike.
REAR DERAILLEUR: SRAM RIVAL eTap AXS
FRONT DERAILLEUR: SRAM RIVAL eTap AXS
SHIFTERS: SRAM RIVAL eTap AXS
CRANKSET: SRAM RIVAL Crankset, 46/33 T
BOTTOM BRACKET: SRAM DUB PF ROAD 86.5
CHAIN: SRAM RIVAL
CASSETTE: SRAM RIVAL XG1250, 10-36
BRAKES: SRAM RIVAL eTap AXS, Flat mount
ROTOR: SRAM Paceline rotor 160/F and 160/R
HANDLEBAR: Syncros Creston 2.0 Compact, Alloy 31.8mm
STEM: Syncros RR2.0, 1 1/4" / four Bolt 31.8mm
SEATPOST: Syncros Duncan 1.0, 27.2/350mm
SEAT: Syncros Tofino Regular 2.0 Channel
HEADSET: Acros AIF-1112
WHEELSET: Syncros RP2.0 Disc, 28 Front / 28 Rear, Syncros Axle w/Removable Lever with Tool
TYRES: Schwalbe ONE Fold, 700x32C
Tell us what the bike is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about the bike?
Scott says, "The ALL NEW SCOTT Addict 10 was designed from the ground up with those longer days in mind. With geometry that is less focused on racing and more on enduring, this bike is yearning to eat up some miles!"
The stiffness definitely makes the Addict feel like a race bike, but the geometry slows down the handling a touch.
Where does this model sit in the range? Tell us briefly about the cheaper options and the more expensive options
This is the top model in the standard Addict range, with the 20, 30 and 40 models coming lower down the range.
Overall rating for frame and fork
8/10
Tell us about the build quality and finish of the frame and fork?
The build quality is impressive with a nicely finished paint job giving it a high-end look.
Tell us about the materials used in the frame and fork?
From Scott:
FRAME: Addict Disc HMF Carbon
Endurance geometry / Replaceable Derailleur Hanger
Internal cable routing
Syncros fender kit ready
FORK: Addict HMF Disc
1 1/4"-1 1/2" Eccentric Carbon steerer
Tell us about the geometry of the frame and fork?
The geometry is endurance based with a slacker head tube than many and a wheelbase of over a metre. The Addict 10 has a relatively short head tube for a bike of this style and size, though, which gives it a racy edge.
How was the bike in terms of height and reach? How did it compare to other bikes of the same stated size?
The stack and reach figures are fairly typical with no surprises.
Was the bike comfortable to ride? Tell us how you felt about the ride quality.
On the whole it is comfortable, although it is quite a firm ride for a bike of this kind.
Did the bike feel stiff in the right places? Did any part of the bike feel too stiff or too flexible?
Stiffness is impressive, especially around the bottom bracket and head tube areas.
How did the bike transfer power? Did it feel efficient?
There are no problems with power transfer at all. It's a stiff bike with a decent weight.
Was there any toe-clip overlap with the front wheel? If so was it a problem?
No.
How would you describe the steering? Was it lively neutral or unresponsive? Neutral.
Tell us some more about the handling. How did the bike feel overall? Did it do particular things well or badly?
The handling isn't as quick as a race bike, but its neutrality does make it easy to control without losing the fun factor.
Which components had the most effect (good or bad) on the bike's comfort? would you recommend any changes?
I liked the saddle; the firm padding is supportive and comfortable.
Which components had the most effect (good or bad) on the bike's stiffness? would you recommend any changes?
The handlebar and stem combination worked fine from a stiffness point of view.
Which components had the most effect (good or bad) on the bike's efficiency? would you recommend any changes?
The wide-ranging SRAM gears make for an efficient ride.
Rate the bike for efficiency of power transfer:
8/10
Rate the bike for acceleration:
8/10
Rate the bike for sprinting:
8/10
Rate the bike for high speed stability:
9/10
Rate the bike for cruising speed stability:
8/10
Rate the bike for low speed stability:
8/10
Rate the bike for flat cornering:
8/10
Rate the bike for cornering on descents:
9/10
Rate the bike for climbing:
8/10
Rate the drivetrain for performance:
9/10
Rate the drivetrain for durability:
8/10
Rate the drivetrain for weight:
7/10
Tell us some more about the drivetrain. Anything you particularly did or didn't like? Any components which didn't work well together?
The SRAM Rival AXS groupset works very well and gives a great spread of gears. The fully wireless system shifts quickly and the brakes are very powerful.
Rate the wheels for performance:
8/10
Rate the wheels for durability:
8/10
Rate the wheels for weight:
7/10
Rate the wheels for comfort:
7/10
Tell us some more about the wheels.Did they work well in the conditions you encountered? Would you change the wheels? If so what for?
Entry-level wheels for this kind of money but they are durable and don't really hamper the ride of the Addict overall.
Rate the tyres for performance:
8/10
Rate the tyres for durability:
8/10
Rate the tyres for weight:
7/10
Rate the tyres for comfort:
8/10
Tell us some more about the tyres. Did they work well in the conditions you encountered? Would you change the tyres? If so what for?
Good quality tyres, and the tan sidewalls look the business too. They aren't tubeless ready though.
Rate the controls for performance:
8/10
Rate the controls for durability:
8/10
Rate the controls for weight:
7/10
Rate the controls for comfort:
8/10
Tell us some more about the controls. Any particularly good or bad components? How would the controls work for larger or smaller riders?
Good quality components and the stem does a good job of hiding the hoses. The compact drop of the handlebar means your position doesn't need to be too extreme to make use of them.
Did you enjoy riding the bike? Yes
Would you consider buying the bike? Yes
Would you recommend the bike to a friend? Yes
How does the price compare to that of similar bikes in the market, including ones recently tested on road.cc?
The Scott is a similar price to the Cube Agree C:62 Pro which also has a Rival AXS groupset. The Giant Defy Advanced Pro 3 is a bit cheaper, but only comes with a Shimano 105 mechanical groupset.
Rate the bike overall for performance:
8/10
Rate the bike overall for value:
6/10
Use this box to explain your overall score
The Addict 10 is a fun bike to ride at speed or cruising along when you want to cover plenty of miles efficiently. It also comes in at a good price considering the full electronic groupset and internal hose/cable routing.
Age: 44 Height: 180cm Weight: 76kg
I usually ride: This month's test bike My best bike is: B'Twin Ultra CF draped in the latest bling test components
I've been riding for: Over 20 years I ride: Every day I would class myself as: Expert
I regularly do the following types of riding: time trialling, commuting, club rides, sportives, fixed/singlespeed,
Add new comment
8 comments
Looks (and sounds) nice but:
Except for the two quite obvious external hoses under the bar tape emerging under the stem before disappearing again? Odd that they left those out, surely wouldn't have been difficult to run them internally in the bars and into the stem that way?
It's about designing down to a price. The RR2.0 stem used on the bike only offers an "integrated cable solution", rather than full integration, which actually means the cables/hoses run under a plastic cover below the stem, instead of running through the stem. To be fully integrated they would have had to spend an extra 30 quid on a more expensive stem (eg RR1.5) I believe the bars themselves are capable of running internal cables. Stem clearly visible here: https://www.syncros.com/global/en/product/syncros-rr-2-0-stem
Just pushed the button on one of these - seems phenomenal value compared to what else is available at that price point... Decided I wanted electronic shifting enough to deal with the weight penalty!
Weights pretty reasonable given there's a Kilo of lard in Rival AXS and some in the wheelset too. Strip the Rival off and swap in 105 mechanical and some deep,section carbons and you'd have a nice machine.
105 mechanical is brilliant but all that
fully internal routing nonsense may have an impact on shifting quality as well as making it very awkward to install.
Or buy the 'Addict 20' model with mechanical Ultegra for £450 less and a 350g weight saving. Not available in this lovely blue though - you can have it in any colour, as long as it's black.
A training partner just bought the '20'. A race bike on 32mm tyres as far as i can decipher!
I'd agree. I have the 2021 Addict 10 (not Addict RC), and even in my 58cm size the wheelbase is sub 1m, and I do get toe overlap (head angle is 73 degrees from memory).