Support road.cc

Like this site? Help us to make it better.

Pedro's Rx Micro-20

8
£39.99

VERDICT:

8
10
Cleverly designed, well made and rugged multi-tool that covers the vast majority of jobs
Good quality

Comfortable to use
Innovative design
More expensive than rivals
No crosshead screwdriver
Weight: 
158g

At road.cc every product is thoroughly tested for as long as it takes to get a proper insight into how well it works. Our reviewers are experienced cyclists that we trust to be objective. While we strive to ensure that opinions expressed are backed up by facts, reviews are by their nature an informed opinion, not a definitive verdict. We don't intentionally try to break anything (except locks) but we do try to look for weak points in any design. The overall score is not just an average of the other scores: it reflects both a product's function and value – with value determined by how a product compares with items of similar spec, quality, and price.

What the road.cc scores mean

Good scores are more common than bad, because fortunately good products are more common than bad.

  • Exceptional
  • Excellent
  • Very Good
  • Good
  • Quite good
  • Average
  • Not so good
  • Poor
  • Bad
  • Appalling

The Rx Micro-20 multi-tool is an innovative and well made multi-tool that sits well in the hand and offers everything you need for on-the-go repairs and adjustments. It's a little expensive, though, and a crosshead screwdriver would have been useful.

The Rx Micro-20 comes with pretty much every tool you might need at the side of the road, and does very well for maintenance too – there were only a couple of times when I needed extra tools at home.

It has 2.5, 3, 4, 5, 6 and 8mm hex wrenches, T25 and T30 Torx bits, a flat blade screwdriver, a 1-12 speed chain tool, 7 and 8mm flare nut wrenches (which have five sides and leave one open – useful for hose fittings), three spoke wrenches (3.23, 3.3, and 3.45), a Shimano Crank Cap tool, a Presta valve core tool, and two microlevers with a chain quick-link storage space.

2021 Pedros RX-Micro 20 3.jpg

Everything except the tyre levers are made from high quality steel, and they undid some fairly old and ragged bolts without stripping or rounding anything, which was impressive. The main body is also steel, and feels robust.

Normally I find metal-bodied multi-tools uncomfortable to use, especially on things like pedals, but Pedro's has cleverly got around this. The plastic tyre levers sit either side of the tool, which both makes good use of space and adds comfort.

2021 Pedros RX-Micro 20 1.jpg

The levers themselves work well enough. I've had a bit of a spate of punctures recently so had a lot of use for them, and although they aren't the best I've used, they are good enough I was happy to leave my larger options at home.

> 12 of the best cycling multi tools – get the right bits to fix your bike's bits

The little home for a quick link inside the levers is another innovative element – links can get easily lost in a saddle bag – but if you forget it's there and use the levers, you can lose the links fairly easily.

The Rx Micro-20 hits the scales at 158g, which is pretty good for a 20 piece multi-tool, although it is not designed to be especially lightweight.

Value

At £39.99 it's on the expensive side, though given the clever design I don't think this is too expensive. You could compare it to the Crankbrothers F15 multi-tool which costs the same and is a little more stylish, but offers fewer tools and doesn't include tyre levers. The Topeak Mini PT30 multi-tool also comes in at £39.99 and offers 10 more tools, but that doesn't offer the compact design or tyre levers.

Overall

I was really impressed with the Rx Micro-20. Even though £40 can easily get you more tools, this has everything I typically need for roadside jobs and most of what I need at home too. The design is also impressive, with the tyre levers being a particular highlight.

Aside from the high price and lack of a crosshead screwdriver, there is not much to criticise about this impressive multi-tool.

Verdict

Cleverly designed, well made and rugged multi-tool that covers the vast majority of jobs

If you're thinking of buying this product using a cashback deal why not use the road.cc Top Cashback page and get some top cashback while helping to support your favourite independent cycling website

road.cc test report

Make and model: Pedro's RX Micro-20

Size tested: n/a

Tell us what the product is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it?

Pedro's says: 'Pedro's new Rx Micro multi-tools deliver the perfect balance of size, weight, and function, ready for trailside repairs and daily adjustments.'

This sounds about right. I didn't find it wanting on the go, and the only thing missing for servicing at home is a crosshead screwdriver.

Tell us some more about the technical aspects of the product?

Pedro's says:

Backed by Pedro's Lifetime Warranty and Rust-Free Guarantee.

Hex Wrenches: 2.5, 3, 4, 5, 6, 8mm.

T25 and T30 Torx and Flat Blade screwdriver.

1-12 speed Chain Tool with integrated: 7 & 8mm Flare Box Wrenches, 3.23, 3.3, & 3.45 Spoke Wrenches, Shimano Crank Cap Tool, and Presta Valve Core Tool.

Micro Levers with integrated Quick Link Storage.

Rate the product for quality of construction:
 
9/10

Very well made with each tool being high quality and the overall construction being robust.

Rate the product for performance:
 
8/10

Does everything required without fuss.

Rate the product for durability:
 
8/10

Full-metal construction means it is likely to last.

Rate the product for weight (if applicable)
 
7/10

A fairly good balance between practicality and weight.

Rate the product for value:
 
5/10

It is slightly more expensive than others with 20-ish tools, but given the innovative elements and the high quality construction, value is good.

Tell us how the product performed overall when used for its designed purpose

Very well.

Tell us what you particularly liked about the product

The innovative tyre levers either side of the tool - it saves space whilst also making it more comfortable in the hand.

Tell us what you particularly disliked about the product

Nothing major, but it would be good to have a cross head screwdriver too.

How does the price compare to that of similar products in the market, including ones recently tested on road.cc?

At £39.99 it's on the expensive side, though given the clever design I don't think this is too expensive. You could compare it to the Crankbrothers F15 multi-tool which costs the same and is a little more stylish, but offers fewer tools and doesn't include tyre levers. The Topeak Mini PT30 multi-tool also comes in at £39.99 and offers 10 more tools, but that doesn't offer the compact design or tyre levers.

Did you enjoy using the product? Yes

Would you consider buying the product? Yes

Would you recommend the product to a friend? Yes

Use this box to explain your overall score

This is a good quality and innovative multi-tool that saves space and offers some really interesting ideas to make it both easier to use and more practical. It's very good.

Overall rating: 8/10

About the tester

Age: 33  Height: 6 ft  Weight:

I usually ride: CAAD13  My best bike is: Cannondale Supersix Evo

I've been riding for: 10-20 years  I ride: Every day  I would class myself as: Expert

I regularly do the following types of riding: commuting, club rides, sportives, general fitness riding, fixed/singlespeed,

George is the host of the road.cc podcast and has been writing for road.cc since 2014. He has reviewed everything from a saddle with a shark fin through to a set of glasses with a HUD and everything in between. 

Although, ironically, spending more time writing and talking about cycling than on the bike nowadays, he still manages to do a couple of decent rides every week on his ever changing number of bikes.

Add new comment

3 comments

Avatar
adamrice | 2 years ago
0 likes

I've noticed that a lot of compact multi-tools have 8-mm allen keys on them. I have to wonder how useful those really are: trying to remove anything secured with a properly torqued 8-mm bolt would be impossible without more leverage than these tools provide.

Avatar
ktache replied to adamrice | 2 years ago
1 like

Fair point.

I got my Park IB-2 for the 8mm hex (that little adaptor that goes on the 6mm hex, can't seem to buy them seperately...).  I have 8 mm crank bolts, but I have  a normal 6mm hex key on my original Cool Tool, which I can use with the Cool Tool for a fair bit of leverage.

Avatar
KiwiMike replied to adamrice | 2 years ago
6 likes

What's far more likely is that you will have to do up an 8 mm bolt that has come loose, in which case a hand tool is just fine.

Latest Comments